Using Bluetooth - Motorola MOTO Q 9c User Manual

using Bluetooth

To use Bluetooth to link to a network:
Note: You must have a computer that has Bluetooth
capabilities for modem link.
1 On your phone, make sure Bluetooth is turned on.
2 On your computer, launch the Bluetooth devices
applet from the task bar.
Note: Not all computers have the same
procedure to locate the Bluetooth window and
set up dial-up networking.
3 On your computer, in the Bluetooth window
menu bar, select the "Connections" menu,
"Dial-up Networking" and then "Find devices. "
4 The computer finds your phone and displays the
dial up networking window.
using a cable
To use a USB cable with your phone to connect with
modem link to a network, first install networking
drivers onto your computer:
1 Place the provided Companion CD into the CD
Drive on your computer. The Companion CD
Installation wizard window automatically displays.
2 On your computer, click "Applications" and then
"Dial-Up Networking Software. "
3 Follow the prompts as directed to install the
drivers onto your computer.
Next, enable modem link on your phone and install
phone drivers:
1 On your phone, press the left soft key (
2 Use the thumb wheel to scroll to Accessories and
press the thumb wheel or center select key (
to select it.
-
) (Start).
s
)
connections 97