Haier HWM85-728 User Manual page 9

4 Use the operation buttons
RESERVE(HOURS)
SOAK
WASH
R
S W R S
E
O I
S A P
E N RINSE
A S
R I
S
V
K H N
E
E
SPIN
(M)
(H) (M (T) (M)
SELF-PROGRAM
PROCESS
Mode and meaning of the indicators
The light is off
Flashing: indicate the running program or indicate the water level
On: indicate the program about to run, or indicate the selected mode or indicate the water level
1 POWER ON/OFF button
" "
Push the "POWER ON/OFF"button to switch on the power.
POWER
Under power-on mode, push it to switch off the power.
ON/OFF
Push the "POWER ON/OFF" button to switch on the power. If the "START/PAUSE"button is not pushed, the
machine will switch off the power automatically after 5 minutes.
2 PROGRAM button
" "
Program Applicable situation
Washing the normal laundries
STANDARD
Washing the bigger and heavier lanudries
HEAVY
Washing the woolen textiles or underwear
GENTLE
Quick waching of the light dirt laundries
QUICK
PROGRAM
Washing the blanket
BLANKET
Washing the cotton textiles
COTTON
Washing the woollen textiles
WOOL
Drying the inner tub and the outer tub, which can avoid growing mildew.(after washing
clothes,there is dampness between the inner tub and the outer tub, the wall of the inner tub
TUB DRY
and out tub can breed mildew, where you can choose thetub dry program, Drying the inner
tub and the outer tub, keeping the inner tub and outer tub dry, which can avoid growing mildew.
66L 70L
62L
57L
MEMORY STANDARD
46L 52L
POWER
COTTON
HEAVY
40L
34L
ON/OFF
CHILD WOOL
26L
18L
QUICK TUB DRY
WATER
LEVEL
PROGRAM
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
nut of the water
inlet hose
jointer of the
water absorption
water inlet valve cushion.
the jointer of the
water inlet hose
Slider
Locking level
Locking level
Slider