Using The Usb Diskette Drive - Toshiba PSAAKC-VA104C User Manual

Print out
Application
buttons
Please refer to "Properties for Synaptics Dual Mode Pad" for details

Using the USB diskette drive

A 3 1/2" diskette drive connects to the computer's USB port.
It accommodates 1.44-megabyte or 720-kilobyte diskettes.
Refer to Chapter 2,
Connecting 3 1/2" diskette drive
To connect the drive, plug the diskette drive connector into a USB port.
Refer to the figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.
If you connect the diskette drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
User's Manual
To send the item in the active window to the printer.
Three application buttons have default setting. You can
assign other functions and programs to button 1 to 3.
The Grand Tour, for more information.
Connecting the USB diskette drive
Operating Basics
4-3