Table of Contents
Advertisement
■
■
■
■
■
■
■
■
■
■
■
■
■
2. Before recording the video to DVD.
■
■
■
■
■
User's Manual
Make sure that your computer is running on AC power when using
WinDVD Creator.
Operate the computer at Full Power. Do not use power-saving
features.
While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display
properly.
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
WinDVD Creator cannot edit or play copy protected content.
Do not change display settings while using WinDVD Creator.
Do not enter standby/hibernation mode while using WinDVD
Creator.
Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
CD recorder, JPEG functions, DVD-Audio, miniDVD, and Video CD
functions are not supported in this version.
While recording video to DVD or tape, please close all other
programs.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
Do not run communication applications like a modem or a LAN.
When you record to DVD disc, please use only discs recommended
by the Drive manufacturer.
Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write DVD.
Do not perform any of the following actions:
•
Operate the computer for any other function, including using a
mouse or TouchPad or closing/opening the LCD panel.
•
Bump or cause vibration to the computer.
•
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
•
Open the DVD drive.
•
Install, remove or connect external devices, including the
following: PC card, SD card/Multi Media Card/Memory Stick,
USB devices, external display, i.LINK devices, optical digital
devices.
Please verify your disc after recording important data.
DVD-R/+R/-RW disc cannot be written in VR format.
Operating Basics
4-26
Advertisement
Table of Contents
