Rehingeing The Door - AEG ARCTIS 75270 GA User Manual

Rehingeing the door

The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
Procced as follows:
To carry
operations, we suggest that this be
made with another person that will
keep a firm hold on the door of the
appliance during the operations.
Gently lay the appliance on its
back.
Procced as follow:
1. Remove the ventilation grille.
2. Remove the bottom hinge (A) by
unscrewing the fixing screws.
3. Remove the door.
4. Unscrew the pin of the bottom
hinge (f) and refit it on the
opposite side.
5. Unscrew the pin of the upper
hinge (d) and refit it on the
opposite side.
6. 6) Insert the door in the upper
hinge and refit the upper
hinges (A).
Pay attention that the border of
the doors are parallel to the top
border, otherwise adjust the
position of the lower hinge of
the door (A).
7. Remove from the ventilation
grille the cover (e) and refit it on
the opposite side.
8. Refit ventilation grille.
9. Unscrew the handle. Refit it on
opposite side after having pierced
the plugs with a punch. Cover the
holes left open with the plugs
contained in the documentation
pack.
22
out the following