1
3
4
Flex the sheets back and forth to loosen them. Do not fold or
crease the paper. Straighten the edges on a level surface.
5
Load the paper stack with the recommended print side faceup.
Notes:
•
Place print side facedown for duplex printing.
•
Place pre-punched paper with the holes toward the front of
the tray.
•
Place letterheads faceup with the header on the left side of
the tray.
•
Place letterheads facedown with the header on the right side
of the tray for duplex printing.
•
Make sure the paper is below the maximum fill line located
on the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
2
6
Insert the tray.
7
From the printer control panel, verify the Paper Size and Paper
Type for the tray based on the paper you loaded.
2
Loading the 2000-sheet
high-capacity feeder
The high-capacity feeder can hold up to 2,000 sheets of letter-, A4-,
2
and legal-size paper (80 g/m
or 20 lb).
1
Pull the tray out.
2
Adjust the width guide as necessary.
2
1