Lan; Wireless Lan; Real Time Clock - Toshiba PSA10C-00REH User Manual

LAN

Problem
Cannot access LAN
Wake-up on LAN does
not work

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Problem
Cannot access
Wireless LAN

Real Time Clock

Problem
The following
message is displayed
on the LCD: RTC
battery is low or
CMOS checksum is
inconsistent.
Press [F1] key to
set Date/Time.
Satellite Pro A10 Series
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Procedure
Make sure the computer's wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator or dealer.
Procedure
The battery for RTC is wearing. Set the date and
time in BIOS setup with the following steps:
1. Press F1 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press End key.
Confirmation message will appear.
5. Press Y key. BIOS setup will terminate and
the computer will be rebooted.
Troubleshooting
9-16