Resend Configuration; Select User Identification Method; Login With Windows Without Specifying The Domain; Login Without Pin Code - Samsung CLX-9250ND Administrator's Manual

2 SafeCom Go Samsung
2.7.4

Resend configuration

If a device added in the SafeCom Administrator is not configured correctly, or if
the device must be reconfigured to a different server, it is possible to resend
the configuration details (Server name and Hostname) to the device.
1. Browse to Devices in the SafeCom Administrator.
2. Right-click the device and click Resend configuration.
The configuration details are now sent to the device and the configuration is
successful when the message "Server is reconfigured" appears.
Note: The Resend configuration functionality does not work with devices that
are SafeCom enabled via the device server.
2.7.5

Select user identification method

1. Open the Configuration web page (2.6.1).
2. Change User identification.
2. Click Apply.
Note: If User code or Card or User code is selected, the maximum number of
digits allowed is 39. If more than 39 digits are entered, the device still only
uses the first 39 digits, and if they are correct the user is logged in.
2.7.6

Login with Windows without specifying the domain

On MFPs with touch screen it is possible to login by entering your Windows
username, password (and domain). If all users belong to the same domain you
can avoid prompting users to enter the domain at the device.
1. Open the Configuration web page (2.6.1).
2. Specify a Default domain.
3. Change Pre-fill domain to Hide.
4. Click Apply.
2.7.7

Login without PIN code

Use PIN codes on devices with a keypad or touch screen. This setting applies to
the device and overrules the equivalent user property. Requesting the user to
enter a personal 4-digit PIN code for identification at the device can enhance
document security.
1. Open the Configuration web page (2.6.1).
2. Clear Login without PIN code if you want to prompt users for PIN code.
3. Click Apply.
D60719-07 25