Safecom Go Samsung - How To; Get The Safecom Go Samsung Software; Specify Safecom Server; Register Device - Samsung CLX-9250ND Administrator's Manual

2 SafeCom Go Samsung
2.7

SafeCom Go Samsung - How to

The following subsections contain step-by-step instructions for some common
administrator tasks.
2.7.1

Get the SafeCom Go Samsung software

The SafeCom Go Samsung software file (*.b94) was installed from the SafeCom
CD or can be downloaded using the SafeCom Administrator function Check for
updates.
Alternatively a software package can be downloaded:
1. Download the safecom_go_samsung_xxx.zip file from the link supplied to
you.
2. Extract the file into the device_software subfolder.
Normally the destination folder is:
C:\Program Files\SafeCom\SafeComG3\device_software
2.7.2

Specify SafeCom Server

1. Open the Configuration web page (2.6.1).
2. Enter the SafeCom servers by hostname or IP address.
3. Click Apply.
4. Repeat step 1 through 3 for additional servers.
Note: After you click Apply you should allow one minute before the changed
SafeCom Server settings take effect. Otherwise you may get a login error at
the device.
2.7.3

Register device

If the SafeCom Go Samsung software is not installed via the SafeCom
Administrator, you need to register the device.
1. Open the Register web page (2.6.1).
2. Enter the User logon and PIN code of a user with Technician or
Administrator rights. The user must have a PIN code.
3. Click Register.
Once the device is registered it will appear in SafeCom Administrator.
The device can also be registered with the SafeCom solution by:

Using the Add device function in SafeCom Administrator.

Login at the device by a user with Technician or Administrator rights.
D60719-07 24