Removing the DisqPlay Module
Note: Illustrations may show parts removed that are not part of this procedure. It is
necessary to remove only the parts listed in the written procedure.
To remove the DisqPlay module, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest cover with TouchPad
3. Remove the hard drive
4. Lift up the DisqPlay module and disconnect the flex cable from
module.
5. Remove the DisqPlay module from the chassis.
To replace the DisqPlay module, reverse these procedures.
P
N
M
RESARIO
OTEBOOK
AINTENANCE AND
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
(pg
25).
S
G
1800 S
ERVICE
UIDE
ERIES
(pg
11).
(pg
14).
ZIF Connector
on the
R
R
EMOVAL AND
EPLACEMENT
27