Remote Control Operation; Controls On Remote Control - Alpine CDA-7867 Owner's Manual

Remote Control Operation

Controls on Remote Control

1 Mute Button
Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
2 Power Switch
Press the switch to turn the power on/off.
3 -/J Button
Press the button to switch between the Play and
Pause modes for CD.
4 CD Changer Button
Press the button to change to the CD changer
operation.
5 Band/Program Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
FM1 FM2 AM
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
1 2 ... 6
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending
order.
22
-EN
VOLUME
1
MUTE
2
PWR
3
ENT
4
CD-CHG
5
BAND
SOURCE A.PROC
PROG
RUE-4185
REMOTE CONTROL UNIT
8 g Button
Radio mode: SEEK (DN) Button
CD mode: Press the button to go back to the
beginning of the current track.
9 f Button
Radio mode: SEEK (UP) Button
CD mode: Press the button to advance to the
beginning of the next track.
! 9 Button
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
" Source Button
Press to select the audio source.
# Audio Processor Button
Press the button to call the external audio
processor mode.
For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
This button is used in conjunction with an optional Ai-
NET processor.
6
7
8
9
!
#
"
6 5 ... 1