Remote Control (Tda-7553E Only) - Alpine TDA-7551E Owner's Manual

VOLUME
1
MUTE
2
PWR
3
ENT
4
CD-CHG
5
BAND
SOURCE
PROG
REMOTE CONTROL UNIT
6
7
A.PROC
RUE-4185
Remote Control
Controls
1 Mute Button
Press the button to lower the volume by
20 dB instantly. Press the button again to
cancel.
2 Power Switch
Press the switch to turn the power on/off.
3 -/J Button
Press the button to switch between the
Play and Pause modes for the tape
player or CD.
4 CD Changer Button
Press the button to change to the CD
changer operation.
5 Band/Program Button
Radio mode: BAND Button
Tape mode: Program Button
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
7 8 Button
Radio mode: Pressing the button will
select, in ascending order, stations
programmed into the radio's presets as
shown below.
1 2...6
Tape mode: Pressing this button places
the unit in the Program Sensor Up mode.
This allows for music selection towards
the end of the tape. See page 32 for
Program Sensor operation.
3D/CD Shuttle mode: DISC Select (UP)
Button
Press the button to select a disc in
ascending order.
English
(TDA-7553E only)
47