Using The Multimix Usb2.0 With Coreaudio On The Macintosh - Alesis MULTIMIX8 USB2.0 Reference Manual

Multichannel mixer/audio interface

Table of Contents

USB2.0 Recording

Using the MultiMix USB2.0 with

CoreAudio on the Macintosh

To configure the MultiMix for use with CoreAudio:

Open the Mac's "Audio MIDI Setup" utility.

Choose the "Alesis USB Audio Device" as both input and

output device.

To verify that the MultiMix USB 2.0 is connected to your Mac,

select the "Alesis USB Audio Device" under "Properties

For:" and then press "Configure Device."

Mac OS X 10.4 or higher is

required by the MultiMix

drivers.

Table of Contents

Need help?

Do you have a question about the MULTIMIX8 USB2.0 and is the answer not in the manual?