Parameter Format; Command Example - Panasonic PT-F200 Specifications

S F
P E C I L
LCD Projector

Parameter format

Parameter format Size (Byte)
<pl> 3 (1 or 2 bytes also
possible when
under control)
<off on> 1
<input signal> 3
<installation> 1
<language> 3
<power condition> 3
<lamp condition> 1
<acctch> 4
<color temp> 1
<date> 8
<time> 6
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.

Command example

To set the volume to +30, send the command as shown below.
STX
Start
NOTE: When sending commands without parameters, a colon (:) is not necessary.
As of October 2008
E
Difinition
Dicimal without signs: 0-999 (000, 001, 002...999)
Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
RG1 = computer 1, RG2 = computer 2, NWP = network,
YUV = component, VID = video, SVD = S-Video
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
ENG = English, DEU = German, FRA = French, ESP = Spanish,
ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese,
SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish,
CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, KOR = Korean
000 = power on (standby mode on), 001 = power off (standby mode off)
0 = standby, 1 = lamp on under control, 2 = lamp off,
3 = lamp off under control
Dicimal without signs: 0000-9999 hours
0 = economy, 1 = normal
y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
h1h2m1m2s1s2 = hour (h) minute (m) second (s)
AVL : 30
Command Parameter
ETX
End
PT-F200
< 9 >