Powershot A300 - Canon PowerShot SD100 Software Starter Manual

PowerShot A300

How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
2
Press the
data with the computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 106) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•USB Mounter (Macintosh) is not supported.
•The camera's LCD monitor will not display images and the Video OUT
settings cannot be set while the Viewfinder function is on in the
Shooting-RemoteCapture window of RemoteCapture.
USB Port
USB Cable
(On) button. This will prepare the camera to exchange
1. Open the terminal cover by slipping a
fingernail in the groove and lifting.
2. Insert it all the way until it clicks.
To the Digital
Terminal
USB Cable
99