Panasonic HC-V520K Owner's Manual page 175

Problem
Scenes/still pictures
cannot be played back.
Scenes cannot be deleted.
Problem
Although this unit is
correctly connected to a
TV, images or sounds
cannot be seen.
The images are squeezed
horizontally.
If the SD card is inserted in
another device, it is not
recognized.
When connected by the
USB cable, this unit is not
detected by the other
devices.
VIERA Link does not work.
Cannot copy scenes on
the SD card by connecting
to other equipment with
the USB cable.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥ Release the protect setting.
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data.
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC, disc etc.
With other products
≥ Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match the aspect ratio of
the TV. (l 99)
≥ The audio during playback mode is not output from this unit
when connected to a TV. Sound levels cannot be adjusted
using this unit, so adjust the sound on the TV.
≥ Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operating
instructions of the device for details.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
(Setting on this unit)
≥ Connect with a HDMI mini cable (supplied).
, then touch [SETUP] # [VIERA Link] # [ON].
≥ Touch
MENU
(l 101)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the input
using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the connected
device.
≥ Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
- 175 -
Check points
(l 94)
Check points
(l 37)
(l 101)