Firmware Upgrade; Demo Mode - Panasonic HC-V520K Owner's Manual

High definition video camera
Hide thumbs Also See for HC-V520K:
Table of Contents

Advertisement

[Firmware Version Info]
The firmware version of this unit is displayed.
: [SETUP] # [Firmware Version Info]
MENU

[Firmware Upgrade]

You can update the firmware version of this unit.
: [SETUP] # [Firmware Upgrade]
MENU
For the latest update information, check the support website below. (As of December
2012)
http://panasonic.jp/support/global/cs/e_cam/ (This Site is English only.)

[DEMO MODE]

This item is used to start the unit demonstration.
: [SETUP] # [DEMO MODE] # [ON]
MENU
≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and
while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
[O.I.S. DEMO]
This item is used to start the Optical Image Stabilizer demo.
: [SETUP] # [O.I.S. DEMO]
MENU
≥ Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be canceled.
- 38 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc-v510Hc-v520Hc-v520m

Table of Contents