Table of Contents
Advertisement
How to remove the battery
When disposing of your used products, delete
personal information from this unit by initializing
the network settings.
This figure describes the disposal of this
unit, it is not instruction for repair. If
disassembled, repair is not possible.
≥ Disassemble after the battery runs out.
≥ If it cannot be removed smoothly, contact
Panasonic's Service Center.
≥ Keep disassembled parts out of reach of
children.
1
Open the side cover, and remove
all of the 6 screws indicated in the
figure below.
≥ Use a cross-slot screwdriver (commercially
available).
2
Remove the circuit board on the
front side (button side) of this unit,
and remove the flexible circuit
board A.
3
After pulling out the built-in battery
connector B, pull out the flexible
circuit board C, and pull out the
speaker connector D upwards.
4
Remove the 4 screws indicated in
the figure below, and remove the
heatsink E.
Remove the connector F of the
5
camera unit, and lift up the circuit
board.
6
Remove the battery by using a
screwdriver.
Regarding the handling of used batteries
≥ Insulate the terminals with cellophane tape or
similar.
≥ Do not disassemble.
29
VQT4X87
Advertisement
Table of Contents
