Table of Contents
Advertisement
Attaching the camera unit to the earhook to wear
1
Insert the camera unit until it
clicks into place.
≥ Insert so that the projecting part A of the
camera will face up.
3
Hook the earpieces D to ears
so that the camera unit will be
positioned on the left, and
adjust the size.
≥ Adjust by slowly pulling the adjuster E
sideways.
≥ If you adjust in such a way that the camera
unit comes into close contact with the cheek,
you can record less blurry images.
∫ How to remove the
camera
Hold the camera attachment
portion as shown in the figure,
and remove the camera unit in
the direction of the arrow.
≥ Do not touch the lens or pull the cable while attaching or removing.
≥ When you adjust the adjuster, do so slowly without applying too much force.
≥ If the adjustment knob comes off, attach it as indicated
in the right figure.
2
Loosen the camera/main unit
connection cable B to the
shape of an ear, and fit it in the
holder C.
L
UP
4
Hold the camera attachment
portion F , and adjust the
direction of the lens.
≥ If the direction of the lens cannot be changed,
loosen the adjustment knob G slightly and
tighten it after adjusting the direction of the
lens.
≥ If the camera unit is shaky, tighten the
adjustment knob G.
∫ How to attach the adjuster (Large)
(supplied)
When the earhook is too tight,
remove the adjuster of the earhook,
and replace it with the supplied
adjuster (Large).
1
Press H in the direction
of the arrow using the
supplied adjuster (Large)
to pull out the attached adjuster.
2
Insert the both side of supplied adjuster
(Large) until it clicks into place. (l 11)
L
UP
UNLOCK
LOCK
15
VQT4X87
Advertisement
Table of Contents
