Adobe 62000236 Using Manual page 461

USING ACROBAT 9 PRO EXTENDED
Print production tools
Adobe In-RIP trapping
Acrobat can automatically trap color documents with the Adobe In-RIP Trapping engine, which is available on Adobe
PostScript output devices that support Adobe In-RIP Trapping.
Adobe In-RIP Trapping can precisely calculate and apply any necessary adjustments to the edges of type and graphics
throughout your document. It can apply effective trapping techniques to different parts of a single object, even if the
object overlaps several different background colors. Trapping adjustments are made automatically, and you can define
trap presets to address the trapping requirements of specific page ranges. The effects of trapping are apparent only on
color separations generated by the trapping engine; you cannot see the results on-screen within the program.
The trapping engine decides where to trap by detecting contrasting color edges. It then creates traps based on the
neutral densities (lightness or darkness) of abutting colors, in most cases by spreading lighter colors into adjacent
darker colors. The trapping settings you specify in the Trap Presets palette modify the trapping engine's results.
Requirements
Adobe In-RIP Trapping requires the following software and hardware:
• A PPD (PostScript Printer Description) file for a printer that supports Adobe In-RIP Trapping. You must select
this PPD by using the operating system driver.
• An Adobe PostScript Level 2 or later output device that uses a RIP that supports Adobe In-RIP Trapping. To find
out if a PostScript output device supports Adobe In-RIP Trapping, contact the manufacturer or your print service
provider.
Trap a PDF
Trapping is a complex process that depends on the interaction of various color, ink, and printing factors; the correct
settings vary, depending on specific press conditions. Do not change the default trap settings unless you've consulted
with your print service provider.
If necessary, choose Advanced > Print Production > Trap Presets to create a trap preset with custom settings for
1
your document and printing press conditions.
2 Assign the trap preset to a page range.
Choose File > Print to open the Print dialog box, and then click Advanced.
3
Select Output from the list on the left.
4
5 For Color, choose In-RIP Separations.
For Trapping, choose Adobe In-RIP.
6
Note: This option works only when you target an output device that supports Adobe In-RIP Trapping.
Click Ink Manager. As necessary, select an ink, specify the following options (only if your service provider
7
recommends changing the settings), and then click OK:
Choose an ink type that describes the selected ink.
Type
Type a value that differs from the default.
Neutral Density
Type a value to set the order in which inks are printed.
Trapping Sequence
Continue specifying other print options, and then click OK to print your document.
8
Last updated 9/30/2011
455