Positioning Your Sc-Z55 - ViewSonic SC-Z55 Zero Client User Manual

Setting Up Your SC-Z55

Positioning Your SC-Z55

2.1 Positioning Your SC-Z55
There are two ways to position your SC-Z55:
• Put it (with its stand) on a desk or a desired place uprightly.
• Mount it on the back of a monitor using a VESA mount kit.
To mount your SC-Z55 on the back of a monitor, please follow the steps below:
Step 1: Remove the Stand from Your SC-Z55
Step 2:
Understand Your Stand / VESA Mount Kit for SC-Z55
Step 3:
Store Away Screws inside the Bracket
Step 4: Remove Screws from the Bracket
Step 5: Mount Your SC-Z55
Step 1: Remove the Stand from Your SC-Z55
To remove the stand from your SC-Z55, please do the following:
1. Place your SC-Z55 on a flat surface with the stand side upward.
2. Remove the screw that fixes the stand to your SC-Z55.
3. Store away the removed screw inside the stand. Detailed instructions will be
Step 2 and 3.
provided in
NOTE
• It's highly recommended to store screws away inside the stand when not needed
to prevent them getting lost.
8