Table of Contents
Advertisement
94
b
Hold down the latch (1) then slip the inner rail out (2).
c
Repeat this procedure with the other rack bracket.
2
Attach the inner rails to both sides of the server.
a
Align the inner rails to the three screw holes located on either
side of the server.
b
Secure the rails to the server using #8-32 x 0.25 inch screws.
3
After attaching the inner rails to the server, put the server aside
and install the server mounting rails to the server rack.
Appendix B: Rack installation
Advertisement
Table of Contents
