Table of Contents
Advertisement
2.4
Installing ASUS PIKE RAID module
The ASUS PIKE RAID module allows users to create RAID function from SAS hard
disk drives connected to the SAS connectors on the motherboard.
SAS1
SAS2
SAS3
SAS4
4.
Set the SGPIO_SEL1 jumper on the backplane to pin 2-3 when connecting
data cables to the SAS connectors on the motherboard.
5.
Install the i Button*.
* PIKE 1078 module won't function if the i Button is not installed.
Order P/N
90-C1SCM0-00UAY00Z
90-C1SCN5-00UAY10Z
ASUS RS500-E6/PS4
1
5
2
S A T
A 4
S A T
A 3
S A T
A 2
3
S A T
A 1
1.
2.
3.
Description
ASUS PIKE 1064E 4-port SAS Module (Support Integrated
RAID 0, 1, 1E)
ASUS PIKE 1078 8-port SAS RAID Module (Support Hardware
RAID 0, 1, 5, 6, 10)
Insert the RAID card into the PIKE RAID
card slot, ensuring that it is completely
seated on the PIKE RAID card slot.
Remove the data cables connected to the
SATA connectors on the motherboard.
Connect the data cables, by numerial
order, to the SAS connectors labeled
SAS1-4 (red) on the motherboard.
4
SGPIO_SEL1
SGPIO_SEL1
2
1
3
2
On-Board
Add-On Card
2-7
Advertisement
Table of Contents
