Table of Contents
Advertisement
2.4
Installing ASUS PIKE RAID module
Follow the steps below to install an optional ASUS RAID card on your motherboard.
4
P S A
S 1
P S A
S 2
P S A
S 3
P S A
S 4
1.
Locate the PIKE RAID card slot on the motherboard, then remove the screw
at the end of the PIKE slot on the motherboard.
2.
Tighten the screw to secure the PIKE card on the motherboard.
3.
Remove the SATA/SAS cables from the onboard SATA1–4 connectors.
4.
Connect the SATA/SAS cables to the onboard SAS1–4 connectors (blue).
5.
Move the SGPIO_SEL1 jumper on the SATA/SAS backplane to 2–3.
Order P/N
90-S00CS0130T
90-S00CS0140T
90-S00CS0150T
ASUS RS700-X7/PS4
2
1
5
Description
PIKE2008 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 1E)
PIKE 2008/IMR 8-port SAS 6G card. RAID Kit (RAID 0, 1, 10, 5, 50)
PIKE 2108 8-port SAS 6G card. RAID Kit
(�/W RAID 0, 1, 10, 5, 6, 50, 60)
3
2-7
Advertisement
Table of Contents
