Table of Contents
Advertisement
2.4
Installing ASUS PIKE 1064E/1078
RAID module
The ASUS PIKE RAID module allows users to create RAID function from SAS hard
disk drives connected to the SAS connectors on the motherboard.
PIKE 1078
3
SATA4
SATA3
SATA2
SATA1
PIKE 1064E
3
SATA4
SATA3
SATA2
SATA1
1. Remove the SATA cables connected on the SATA connectors.
2. Insert the PIKE RAID card into the PIKE RAID card slot.
3. Connect the SAS cables to the SAS connectors on
the motherboard and SATAII/SAS backplane board*.
4. Install the iButton (for PIKE 1078 only)**.
* Ensure that the bootable hard disk drive is connected to the
SATA/SAS1 connectors.
** Ensure that the jumper caps are placed on pins 1–2 of the IBTN_SEL1 jumper.
Order P/N
90-C1SCM0-00UAY10Z
90-C1SCN5-00UAY10Z
ASUS RS160-E5
2
SAS4
SAS3
SAS2
SAS1
4
1
2
SAS4
SAS3
SAS2
SAS1
1
Description
ASUS PIKE 1064E 4-port SAS Module (w/ four 7-pin data
cables) for RS160-E5 (Support Integrated RAID 0, 1, 1E)
ASUS PIKE 1078 8-port SAS RAID Module (Support Hardware
RAID 0, 1, 5, 6, 10)
2-5
Advertisement
Table of Contents
