Using The Fingerprint Reader (Select Models Only); Set Up The Fingerprint Reader - Compaq nw9440 - Mobile Workstation Manual

Pointing devices and fingerprint reader
Using the fingerprint reader
(select models only)
The fingerprint reader allows you to log on to Microsoft Windows
using a registered fingerprint in ProtectTools Security Manager
instead of using a Windows password.
Two steps are required for your first logon to Windows using the
fingerprint reader:

1. Set up the fingerprint reader.

2. Use your registered fingerprint to log on to Windows.
Set up the fingerprint reader
To set up the fingerprint reader:
1. In Windows, double-click the Credential Manager icon in
the notification area of the taskbar.
– or –
Select Start > All Programs > ProtectTools Security
Manager, and then click the Credential Manager tab, which
is located on the left.
2. On the "My Identity" page, click Log On, located in the
upper-right corner of the page.
The Credential Manager Logon Wizard opens.
3. On the "Introduce Yourself" page, click Next to accept the
default user name.
✎
4. On the "Enter Password" page, enter the user's Windows
password, if one has been established. Otherwise, click
Finish.
1–4
If there are other users registered on this computer, you can
select the person whose fingerprints need to be registered by
entering the Windows user name.
Pointing Devices and Keyboard