Hotkey Procedures - Compaq nw9440 - Mobile Workstation Manual

Hotkey procedures

To use a hotkey command on the computer keyboard, either
■
Briefly press the
of the hotkey command.
– or –
■
Press and hold down the
of the hotkey command, and then release both keys at the
same time.
Initiate standby (fn+f3)
Press
fn+f3
When standby is initiated, your work is stored in random access
memory (RAM), the screen is cleared, and power is conserved.
While the computer is in standby, the power lights blink.
The computer must be turned on before you initiate standby. If
the computer is in hibernation, you must restore from hibernation
before you can initiate standby.
To resume from standby, briefly press the power button. To
restore from hibernation, briefly press the power button.
The function of the
you can set the
standby. In all Windows operating system windows, references to
the sleep button apply to the
Pointing Devices and Keyboard
key, and then briefly press the second key
fn
to initiate standby.
hotkey can be changed. For example,
fn+f3
hotkey to initiate hibernation instead of
fn+f3
key, briefly press the second key
fn
hotkey.
fn+f3
Keyboard
2–3