Dell SP2009W - Widescreen LCD Monitor Service Manual page 14

20" LCD Color Monitor
Horizontal position
Vertical Position
Zoom
Phase
Sharpness
Dynamic Contrast
Response Time
Use the and buttons to adjust image left and right (min 0 ~ max 100).
NOTE: When using DVI source, the Horizontal Position setting is not available.
Use the and buttons to adjust image up and down (min 0 ~ max 100).
NOTE: When using DVI source, the Vertical Position setting is not available.
Allows you to zoom in to specific area of interest on your monitor.
Use and buttons to adjust the zoom from '0' to '100'.
NOTE: Zoom will reset to default after power cycling or after power save recovery.
NOTE: Zoom default setting will be zero when using PC format (RGB color space)
and 10 when using the video format from DVD players (YPbPr color space).
If satisfactory results are not obtained using the phase adjustmenu, use the
Pixel Clock (coarse) adjustmenu and then use Phase (fine).
NOTE: Pixel Clock and Phade Adjustments are only available for "VGA" input.
Allows you to increase or decrease the sharpness of the image.
Use and buttons to adjust the sharpness from '0' to '100'.
The dynamic contrast helps get a higher contrast if you choose Game preset,
Movie Preset, Sports Preset and Nature Preset.
Use the button to enable the Dynamic Contrast adjustment.
Use the button to disable the Dynamic Contrast adjustment.
NOTE: Brightness control is disabled in Dynamic Contrast mode.
Response time is the time required for an LCD pixel to change from fully
active (black) to fully inactive (white), then back to fully active again.
You can set the response time to:
14
Dell SP2009Wc