**Use the PC Win 2000/98/95 white pattern, with some icon on it, and Change the Resolution to 640x480 60
Hz / 31 KHz
I.
NO SCREEN APPEAR
Check Adapter module have 12V output?
Check FPC cable loose or tight ?
Check Inverter Block Trouble shooting
Check Dc to Dc block trouble shooting
Check Scalar Trouble shooting
End
INVERTER BLOCK TROUBLE SHOOTING
Check the CN6 : Pin 1& Pin2 = 12v for Inverter power supply
CN6 : Pin 4 = Lamp current control
CN6 : Pin 6 = Inverter on-off control
power switch off ( LED orange)
Check all above status is meet or not ?
6. Trouble-Shooting
YES
YES
ok
ok
ok
must have 0 volt to 3.3 volt Voltage variable when adjust Brightness
must have 3.3volt when power switch on ( LED green ) and must have 0 volt When
no
Replace Inverter module to new one
If the product name of this monitor is
T563KCDHKCCPA or T563KCDHKCCPN
Check Dc to Dc Module block trouble shooting
10