Keyboard Screen - Yamaha Mobile Owner's Manual

Using the Keyboard screen, you can use the on-screen keyboards to add notes directly into phrases or song blocks.
Tap to move the record position to the
start of the phrase or block.
Tap to turn on recording (i.e., direct
input of notes). Tap once again to stop
recording.
Use the button at the top of the slider to
select its function.
MOD: The slider will function as a
modulation wheel.
PITCH: The slider will function as a pitch
bend wheel.
VELOCITY: The slider can be dragged
to set a velocity range for the notes
played.
Mobile Music Sequencer Owner's Manual

Keyboard Screen

Tap to bring up the voice list. You can then tap a voice from the list to
select it. If recording into a phrase, the phrase's voice setting will change
accordingly. If recording into a song block, the corresponding part's voice
will change accordingly.
Tap to change the size of the
on-screen keyboards.
REPLACE: Existing notes in the phrase or block will be deleted
when new ones are recorded.
OVERDUB: Recorded notes will be added to those already in
Tap to set the
the phrase or block.
quantization mode.
Use these scroll bars to move along the
length of the keyboards.
Tap to return to the previous screen.
Tap to toggle between the on-screen
keyboards and control-change input
mode.
Active only when recording into a
phrase, Chord can be tapped to
specify the phrase's chord root and
type.
Active only when recording into a
phrase, this value sets the length of the
phrase.
11