Rebuilding A Mirror Drive - Asus P5E3 Premium WiFi-APn User Manual

Rebuilding a Mirror Drive

When one of the disks in a RAID 1 (Mirror) configuration is unplugged from the
system, then plugged in again, a dialogue box appears to ask you to rebuild the
Mirror drive. Press <Y> to confirm; otherwise, press <N>.
This option allows you to rebuild the Mirror drive later and synchronize the data
between two hard disks.
To rebuild a Mirror drive:
1. In the main JMB363 RAID BIOS menu, highlight Rebuild Mirror Drive using
the up/down arrow key then press <Enter>.
2. Using the <TAB>, move to the RAID Disk Drive List menu and highlight the
RAID set that you want to rebuild. Press <Del> to begin rebuilding the Mirror
configuration.
A status bar at the bottom of the screen shows the progress of the rebuilding.
JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save and Exit Setup
Exit Without Saving
[RAID Disk Drive List]
Members(HDDx)
RDD0: JRAID
Saving the settings and exiting setup
When you have finished, highlight Save & Exit Setup using the up/down arrow key
then press <Enter> to save the current RAID configuration and exit the JMB363
RAID BOS utility.
A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise,
press <N> to return to the JMB RAID BIOS menu.
ASUS P5E3 Premium/WiFi-AP @n
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror
Save and Exit Setup
Exit Without Saving
[Hard Disk Drive List]
HDD0: HDS722516VLSA80
HDD1: HDS722516DLA380
Model Name RAID Level
1-Mirror
Rebuilding... 01%, please wait...
Drive
Model Name Capacity
164 GB
164 GB
Capacity Status
XXX GB Rebuild
Type/Status
RAID Inside
RAID Inside
01
5-59