Dram Static Read Control; Transaction Booster; Dram Command Rate - Asus P5E - AiLifestyle Series Motherboard Instructions Manual

Read to Precharge Time [Auto]
Configuration options: [Auto] [1 DRAM Clocks]~[15 DRAM Clocks]
4.4.6 DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
4.4.7 DRAM Static Read Control [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
4.4.8 Transaction Booster [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
Boost Level [0]
This sub-item appears only when you set the Transaction Booster item to
[Enabled]. Set this item to a higher level to get better performance. Use the
<+> and <-> keys to adjust the value. The values range from 0 to 3.
Relax Level [0]
This sub-item appears only when you set the Transaction Booster item to
[Disabled]. Set this item to a higher level to get better compatibility. Use the
<+> and <-> keys to adjust the value. The values range from 0 to 3.
The following seven items appear only when you set the Ai Overclock Tuner
item to [Manual] and [X.M.P.] and are adjusted by typing the desired values
using the numeric keypad and press the <Enter> key. Use the <+> and <-> keys
to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
VCORE Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 1.10000V to
2.40000V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting
a high VCore voltage may damage the CPU permanently, and setting a low
VCore voltage may make the system unstable.
CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with
a 0.02V interval.
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from
1.20V to 1.50V with a 0.02V interval.
4-20 Chapter 4: BIOS setup