Canon PowerShot A75 Software Starter Manual page 56

52
Starting ImageBrowser
How to Set ImageBrowser to Start Automatically with Mac OS X
You can have ImageBrowser start automatically when you connect the camera to the
computer by adjusting the following settings.
Mac OS X v10.2
1. Start Image Capture, click the [Image Capture] menu and select [Preferences].
2. In the next menu, click the [Camera Preferences] list box and select [Other].
3. Select [ImageBrowser] in the program selection window.
4. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac OS X v10.1
1. Start Image Capture and select [Other] from the Hot Plug Action list box.
2. Select [ImageBrowser] in the program selection window.
3. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac OS 9
1
Attach the supplied interface cable to the computer's USB port and the camera's
Digital Terminal. Prepare the camera for communication with the computer.
Procedures for attaching the camera to the computer and placing it in
the correct mode for connecting vary between camera models. See
Information about Your Camera (p. 92) for details.