Powershot Sd110 Digital Elph/Digital Ixus Ii S - Canon PowerShot A75 Software Starter Manual

98

PowerShot SD110 DIGITAL ELPH/DIGITAL IXUS II s

PowerShot SD110 DIGITAL ELPH/DIGITAL
IXUS II s
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
2
Set the mode switch to the playback mode and turn the camera's power on.
This will prepare the camera to exchange data with the computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.3
See ArcSoft Camera Suite 1.3 CD-ROM (p. 77) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
The camera does not record RAW images.
USB Port
To the DIGITAL
Terminal
Interface Cable
1. Slip a fingernail under the terminal
cover and lift to open.
2. Insert it all the way until it clicks.