If The Dishwashing Results Are Not Satisfactory - AEG FAVORIT 88070 User Information

Malfunction
The cycle is not starting.
Rust spots are visible in
the dishwashing com-
partment.
A whistling noise can be
heard when washing
dishes.
The dishwasher interior
light does not come on.

If the Dishwashing Results are not Satisfactory

The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the dishwashing water did
not reach all items. The baskets for the dishes must not be overload-
ed.
• The filters in the base of the washing compartment are dirty or incor-
rectly positioned.
• Good quality detergent was not used, or too little was used.
• In the case of scale deposits on the dishes: The dishwasher salt dis-
penser is empty or the water softening system has been incorrectly
set.
• The drain hose is incorrectly positioned.
Possible cause
The mains plug is not
plugged in.
A fuse in the house's wiring
system is defective.
For dishwasher models with
a delay start timer:
A start time has been select-
ed.
The dishwashing compart-
ment is made from rust-free
stainless steel. Rust spots in
the washing compartment
are due to rust particles
from external sources (rust
particles from water pipes,
pans, cutlery, etc.). Remove
such spots with a commer-
cially-available cleaning
product for stainless steel.
The whistling is not a cause
for concern.
The mains plug is not
plugged in.
The bulb in the interior light
is faulty.
Remedy
Plug in mains plug.
Replace fuse.
If the dishes are to be
washed immediately, cancel
the delay start.
Only wash cutlery, dishes and
pans that are suitable for
dishwasher use.
Use a different brand of de-
tergent.
Plug in mains plug.
Contact the your local
Service Force Centre.
33