If The Dishwashing Results Are Not Satisfactory - AEG FAVORIT 44050 Vi User Information

Malfunction
The programme is not
starting.
Rust spots are visible in
the dishwashing compart-
ment.
A whistling noise can be
heard when washing dish-
es.

If the Dishwashing Results are not Satisfactory

The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the dishwashing water did
not reach all items. The baskets for the dishes must not be overload-
ed.
• The filters in the base of the washing compartment are dirty or incor-
rectly positioned.
• Good quality detergent was not used, or too little was used.
• In the case of scale deposits on the dishes: The dishwasher salt dis-
penser is empty or the water softening system has been incorrectly
set.
• The drain hose is incorrectly positioned.
The dishes do not dry and are not shining.
• Poor quality rinse aid was used.
• The rinse aid dispenser is empty.
Possible cause
The mains plug is not
plugged in.
A fuse in the house's wiring
system is defective.
For dishwasher models with
a start delay timer:
A start time has been se-
lected.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially availa-
ble cleaning product for
stainless steel.
The whistling is not a cause
for concern.
Remedy
Connect the plug to a mains
socket.
Replace fuse.
If the dishes are to be
washed immediately, cancel
the start delay.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
Use a different brand of de-
tergent.
25