Konica Minolta bizhub 652 Technical Training Manual page 59

6.2 Restrictions: Printing (3/3)

The following options are available when printing data.
If your MFP does not have the desired option, a print job is executed, ignoring
the option setting in this application.
Duplex
Staple

The following paper size is selected in an MFP when printing data.
- When printing a PDF or XPS file:
Select the paper size specified at file creation.
- When printing an image file or E-mail body:
Select the default paper size specified in your MFP.
The print image is enlarged or reduced to fit the paper size.
- When printing a Web page:
Paper of the size specified in [Other Settings] is used.
However, when specifying an input tray, note that a warning message appears
on the MFP side if the specified paper size does not match that of the input tray.
Collate Punch
Monochrome Input Tray
Offset