AEG FAVORIT 88060 VI User Manual page 42

42
Select and start a washing programme
Starting the washing programme with delay start
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Set the washing programme and functions.
4. Press the delay touchpad again and again until the display shows the time of the
delay start.
• The time of the delay start flashes in the display.
• The delay indicator is on.
5. Close the appliance door, the countdown starts automatically.
When the countdown is completed, the washing programme starts automatically.
The opening of the appliance door interrupts the countdown. When you close the door,
the countdown continues from the point of interruption.
Cancelling the delay start
The countdown is not operating
1. Press the delay touchpad again and again until the display shows the number of the
washing programme.
• The number flashes in the display.
2. Close the appliance door, the washing programme starts automatically.
The countdown is operating
1. Open the appliance door.
2. Press the delay touchpad again and again until the display shows the number of the
washing programme.
• The number flashes for some seconds and then the time of the washing pro-
gramme shows in the display.
3. Close the appliance door, the washing programme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
• Press the RESET touchpad until the display shows two horizontal status bars.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.