Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus p4p800-VM User Manual

2.2.4 Menu items

The highlighted item on the menu bar
displays the specific items for that menu. For
example, selecting Main shows the Main
menu items.
The other items (Advanced, Power, Boot, and
Exit) on the menu bar have their respective
menu items.

2.2.5 Sub-menu items

An item with a sub-menu on any menu screen is distinguished by a solid triangle
before the item. To display the sub-menu, select the item and press Enter.

2.2.6 Configuration fields

These fields show the values for the menu items. If an item is user- configurable,
you may change the value of the field opposite the item. You can not select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press Enter to display a list of options.
Refer to "2.2.7 Pop-up window."

2.2.7 Pop-up window

Select a menu item then press Enter to
display a pop-up window with the
configuration options for that item.

2.2.8 Scroll bar

A scroll bar appears on the right side of a
menu screen when there are items that do
not fit on the screen. Press Up/Down arrow
keys or PageUp/PageDown keys to display
the other items on the screen.

2.2.9 General help

At the top right corner of the menu screen is a brief description of the selected
item.
ASUS P4P800-VM motherboard user guide
System Time [11:10:19]
System Date [Thu 03/27/2003]
Legacy Diskette A [1.44M, 3.5 in]
Primary IDE Master :[ST320413A]
Primary IDE Slave :[ASUS CD-S340]
Secondary IDE Master :[Not Detected]
Secondary IDE Slave :[Not Detected]
Third IDE Master :[Not Detected]
Fourth IDE Master :[Not Detected]
IDE Configuration
System Information
Main menu items
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
DDR Reference Voltage [Auto]
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Graphic Adapter Priority [AGP/Int. VGA]
Onboard Video Memory [Enabled, 8MB]
Graphics Aperture Size [ 64 MB]
Spread Spectrum [Enabled]
Boot Display Device [Auto]
Flat Panel Type [640x480 LVDS]
TV Standard [Auto]
MPS Revision [1.4]
Pop-up window
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system time.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Set the CPU external
frequency for next
boot.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Scroll bar
2-9