Aiphone IS SERIES Operation Manual page 18

E
Setting the call transferring [TRANSFER]
You can make the following settings for transferring calls.
Sub item Description
[CALL Enables (ON) or disables (OFF)
TRANSFER]
the call transferring.
[TRANSFER (Available when [CALL
DESTINA] TRANSFER] is set ON.)
(Transfer
Selects a master station in your
destination)
site or a remote site as the
transfer target.
[TRANSFER (Available when [CALL
DELAY]
TRANSFER] is set ON and the
target is set at [TRANSFER
DESTINA].)
Sets the time of starting
transferring after a call is received.
[SCHEDULE Enables or disables the call
TRANSFER]
transferring to be performed
on the schedule preset by the
system settings automatically.
[SCHEDULE (Available when [SCHEDULE
DESTINA]
TRANSFER] is set ON.)
(Schedule
Selects a master station in your
destination)
site or a remote site as the
transfer target on the schedule.
1 Press repeatedly to select [TRANSFER] (so
that it is highlighted), and then press ZOOM/WIDE
to select.
The sub items are displayed.
The sub items can also be displayed by pressing
*
TRANSFER in the standby mode.
NOTE:
The above display example differs from the actual one.
2 Press repeatedly to select the target sub
item (so that it is highlighted), and then press
ZOOM/WIDE to select.
3 Make the settings on each sub item as follows.
18
[CALL TRANSFER]:
Press
Setting range
press ZOOM/WIDE to decide on the selected one.
ON
OFF
(Registering a
master station or
[TRANSFER DESTINA] (Transfer destination):
a remote site)
This setting is available only when [CALL TRANSFER] is ON.
*
00-60 (sec.)
Press
in your site or a remote site (so that it is highlighted), and
then press ZOOM/WIDE .
The LED on
*
ON TRANSFER] is set ON and the target is set at [TRANSFER
OFF
DESTINA].
(Registering a
[TRANSFER DELAY]:
master station or
a remote site)
This setting is available only when [CALL TRANSFER] is set
*
ON and the target is set at [TRANSFER DESTINA].
Press
press ZOOM/WIDE to select.
If the delay time is set to "00", a call will be transferred to the
*
target directly.
[SCHEDULE TRANSFER]:
Press
press ZOOM/WIDE to decide on the selected one.
[SCHEDULE DESTINA] (Schedule destination):
This setting is available only when [SCHEDULE TRANSFER]
*
is ON.
Press
or a remote site (so that it is highlighted), and then press
ZOOM/WIDE .
Press
*
previous screen.
repeatedly to select ON or OFF, and then
repeatedly to select the target master station
TRANSFER
lights up (red) when [CALL
repeatedly to set the delay time, and then
repeatedly to select ON or OFF, and then
to select the target master station in your site
SETTING
as "BACK" function to return to the