Changing The Spin Speed/Selecting The Rinse Hold Function; Set The Delay Timer/Soaking Duration - AEG OKO-LAVAMAT 76760 Operating Instructions Manual

Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Press the spin speed/RINSE HOLD button as often
as necessary, until the indicator for the desired spin
speed is illuminated.
If you do not change the spin speed, the final spin
3
will be adjusted automatically depending on the
type of wash cycle:
– COTTONS/LINEN
– EASY CARES/EASY IRON
– DELICATES
– WOOL/SILK /P (Hand Wash)
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Press the spin speed/RINSE HOLD button as often as necessary, until the
RINSE HOLD indicator is illuminated.
If RINSE HOLD is selected, the washing will remain in the final rinse wa-
3
ter and will not be spun.

Set the Delay Timer/Soaking Duration

Delay Timer
The button DELAY TIMER allows the start of a washing program to be
advanced by 1 to a maximum of 19 hours.
To do this, press the button DELAY TIMER as
0
often as necessary until the required start de-
lay is shown in the multidisplay, e.g.12h for a
program start delay of 12 hours.
If19h is shown and you press again the run
time of the set washing program appears
(display in minutes, e.g.120).
In this state, the delay timer is not set.
Operating Instructions
1600 revolutions per minute
1200 revolutions per minute
1200 revolutions per minute
1200 revolutions per minute
21