Child Lock Function - AEG LAVATHERM 65270AC User Manual

12 www.aeg.com
STARTING A PROGRAMME
To activate the programme push the
Start/Pause button. The LED above the
push button changes the color to red.
CHANGE A PROGRAMME
To change a programme, turn the pro-
gramme selector to Stop and then set the
programme again.

CHILD LOCK FUNCTION

The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push buttons
and the programme dial (this function
does not lock On/Off button). To activate
the child lock function push the Anti-
crease and Delay Start buttons at the
same time until the symbol
view on the display. To deactivate push
again the above buttons until the symbol
go out of view.
You can activate the child lock function:
• before you push the Start/Pause button
- the appliance cannot start
• after you push the Start/Pause button -
all the push buttons and the pro-
gramme dial are deactivated
AT THE END OF PROGRAMME
When the drying cycle is completed, the
symbol flashes on the display. If the
Buzzer function is on, an acoustic signal
sounds intermittently for one minute.
To remove the laundry:
1. Push the On/Off button for 2 seconds
to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
After each drying cycle:
• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)
come into