Setting Manually; Setting Electronically - Electrolux F50674 User Manual

Clarke
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
The water softener must be set in both ways: manually, using the water hardness
dial and electronically.

Setting manually

The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to posi-
tion 1 or 2 (see table).
4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher must be in setting mode.
2. Press simultaneously and keep pressed buttons B and C, until the lights of
buttons A, B and C start flashing.
3. Press button A, the lights of buttons B and C turn off while the light of button
A goes on flashing. At the same time the End of programme indicator light
Water hardness
°TH mmol/l
65 - 75 6,51 - 7,5
51 - 64 5,1 - 6,4
40 - 50 4,0 - 5,0
33 - 39 3,3 - 3,9
26 - 32 2,61 - 3,2
19 - 25 1,9 - 2,5
7 - 18 0,71 - 1,8
< 7
Adjusting the water hardness
manually
2
2
2
2
1
1
1
< 0,7 1
Set the water softener
setting
electronically
level 8
level 7
level 6
level 5
level 4
level 3
level 2
level 1
11
Use of salt
yes
yes
yes
yes
yes
yes
yes
no