Table of Contents
Advertisement
2-2-6 SATA Configuration
SATA Port 0/1/2/3/4/5
Displays the installed HDD devices information.
SATA Mode
Select the on chip SATA type.
RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
AHCI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID
function is disabled and cannot be access the RAID setup utility at boot time.
Options available: RAID/AHCI/Disabled. Default setting is AHCI Mode.
(Note)
This item is will not appear when the SATA mode is set ot RAID mode.
(Note)
- 53 -
BIOS Setup
Advertisement
Table of Contents
