Table of Contents
Advertisement
3.8.2
Boot Settings Configuration
Quick Boot [Enabled]
[Disabled]
[Enabled]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
[Force BIOS]
[Keep Current]
Bootup Num-Lock [On]
[Off]
[On]
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
Hit 'DEL' Message Display [Enabled]
[Disabled]
[Enabled]
3-36
E5889_M4A88TD-V EVO_Contents V2.36 36
When set to [Disabled], BIOS performs all the POST items.
When set to [Enabled], BIOS skips some power on self tests (POST) while
booting to decrease the time needed to boot the system.
Enables the full screen logo display feature.
Disables the full screen logo display feature.
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Sets the power-on state of the NumLock to [Off].
Sets the power-on state of the NumLock to [On].
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Disables this function.
The system displays the message "Press DEL to run Setup" during POST.
Chapter 3: BIOS setup
5/26/10 4:05:23 PM
Advertisement
Table of Contents
