Table of Contents
Advertisement
5.
Browse the contents of the RAID driver
disk to locate the file txtsetup.oem.
6.
Double-click the file. A window appears,
allowing you to select the program for
opening the oem file.
7.
Use Notepad to open the file.
8.
Find the [HardwareIds.SCSI.Napa_i386_ahci8086] and
[HardwareIds.SCSI.Napa_amd64_ahci] sections in the txtsetup.oem file.
9.
Type the following line to the bottom of the two sections:
id = "USB\VID_xxxx&PID_xxxx", "usbstor"
[HardwareIds.SCSI.Napa_i386_ahci8086]
id= "PCI\VEN_1002&DEV_4392&CC_0104","ahcix86"
id= "PCI\VEN_1002&DEV_4391&CC_0106","ahcix86"
id= "PCI\VEN_1002&DEV_4393&CC_0104","ahcix86"
id= "USB\VID_03EE&PID_6901", "usbstor"
[HardwareIds.SCSI.Napa_amd64_ahci]
id= "PCI\VEN_1002&DEV_4392&CC_0104","ahcix64"
id= "PCI\VEN_1002&DEV_4391&CC_0106","ahcix64"
id= "PCI\VEN_1002&DEV_4393&CC_0104","ahcix64"
id= "USB\VID_03EE&PID_6901", "usbstor"
Add the same line to both sections.
The VID and PID vary with different vendors.
10.
Save and exit the file.
4-20
E5889_M4A88TD-V EVO_Contents V2.20 20
Chapter 4: Software support
5/26/10 4:05:55 PM
Advertisement
Table of Contents
