Table of Contents
Advertisement
electrolux
The water softener must be set in
both ways: manually, using the water
hardness dial and electronically, using
the programme knob and the
button.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
1. The dishwasher must be switched
off.
Keep the
pressed and turn the programme
knob clockwise until the
programme marker corresponds
with the first washing programme.
2. Release the
3. At the same time, the
4. To change the level, press the
button
5. To memorise the operation, switch
the On/Off and start/cancel
indicator lights start to flash
indicating that you have activated
the water softener setting function.
indicator light starts to
flash.
The current level is indicated by
the number of flashes of the
indicator light
and a pause of about 3 seconds.
5 flashes, pause, 5 flashes, pause,
etc... = level 5
6 flashes, pause, 6 flashes, pause,
etc... = level 6
button. Each time the
button is pressed the level
changes.
if the current level is 5, by pressing
button once, level 6 is
selected.
if the current level is 10, by
pressing
level 1 is selected.
off the dishwasher by returning the
programme knob to the Off
position.
button,
button once,
Advertisement
Table of Contents
