Table of Contents
Advertisement
1
— Capture mode indicator
2
— Audio mute on indicator
3
— Active toolbar (not displayed during recording).
See "Active toolbar", p. 59.
4
— Battery charge level indicator
5
— Video quality indicator. To change this setting,
select
Options
>
6
— Video clip file type
7
— Available recording time. When you are recording,
the current video length indicator also shows the
elapsed and remaining time.
8
— The location to which the video clip is saved.
9
— GPS signal indicator.
information", p. 60.
To display all viewfinder indicators, select
Show
icons. Select
video status indicators, and during the recording, the
64
Settings
Video
quality.
>
See "Location
Options
Hide icons
to display only the
time remaining, zoom bar when zooming, and the
selection keys.
Record videos
1.
If the camera is in the image mode, select the video
mode from the active toolbar.
2.
To start recording, press the capture key. The red
record icon (
) is displayed and a tone sounds.
3.
To pause recording at any time, press Pause. Select
Continue
to resume. If you pause recording and do
not press any key within one minute, the recording
stops.
To zoom in or out of the subject, use the zoom key
in your device.
4.
To stop recording, press the capture key. The video
clip is automatically saved in Photos. The maximum
length of a video clip is approximately 30 seconds
with sharing quality and 90 minutes with other
quality settings.
To activate the front camera, select
secondary
camera. To start recording a video, press
the scroll key. To zoom in or out, scroll up or down.
After recording a video
>
After you record a video clip, select from the following
options in the active toolbar (available only if
captured video
is set to
Options
Use
>
Show
On
in the video settings):
Advertisement
Table of Contents
