Table of Contents
Advertisement
To cancel a pairing, scroll to the device, and select
Options
> Delete. If you want to cancel all pairings, select
Options
>
Delete
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the
Inbox
received through Bluetooth connectivity are indicated by
. See
'Inbox—receive
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. See
'Settings', p. 62. Before the mode can be activated, the
two devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit passcode,
and set the other device as authorized. See
p. 63. Activate the remote SIM mode from the other
device.
When remote SIM mode is on in your device,
is displayed in the standby mode. The connection to the
wireless network is turned off, as indicated by
64
Copyright © 2007 Nokia. All rights reserved.
all.
is shown, and the item is
folder in Messaging. Messages
messages', p. 73.
'Pair
Remote SIM
signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select
Exit remote SIM
USB
Press
, and select
To have the device ask the purpose of the USB cable
connection each time the cable is connected, select
connection
> Yes.
If
Ask on connection
devices',
the mode during an active connection, select
and from the following:
Media
player—to synchronize music with Windows Media
Player. See
'Music transfer with Windows Media
p26.
in the
mode.
Tools
>
Connectivity
> USB.
is set to off or you want to change
USB mode
Ask on
Player',
Advertisement
Table of Contents
