Table of Contents
Advertisement
2.6. Battery Pack Installation
First turn off the computer and disconnect the AC adapter if attached to the computer; then follow
these steps:
1.
Unlatch the battery compartment door (right front corner of the unit) as shown in Figure 2-7.
2.
Slide the battery compartment door out slightly and then swing the door outward as shown in
Figure 2-7.
3.
If changing batteries, grasp the loop attached to the battery and pull the battery out of the
compartment.
4.
Look for label "THIS SIDE UP" and insert the battery with label up until it snaps in place; then
close the battery compartment door.
Figure 2-7
Battery Pack Installation
2-10
Installation
Advertisement
Table of Contents
Troubleshooting
